Problem With Wireless Adapter Or Access Point PhotoIf the wireless adapters aren’t configured, they can cause problems. One such problem is the Problem with wireless adapter or access point. If this error is being experienced by your PC, you will see the Problem with wireless adapter or access point error message on your screen, and you won’t be able to access the Internet.

However, this problem can be easily fixed. To fix this error, you can try performing the following solutions:

Delete Your Wireless Profile

This error and many other errors can be caused if your Wi-Fi configuration profile is corrupted. You can fix this issue by using forget the network option or by deleting the wireless profile.

To delete the wireless profile, follow these steps:

  • Press Windows key and X key together. That will open the Power User Menu.
  • In that menu select Command Prompt (Admin) to open the Command Prompt as an administrator.

Select Command Prompt By Right Clicking The Start Menu

  • When the Command Prompt window opens, type in the following command: netsh wlan delete profile name=”WirelessProfileName”

Replace the WirelessProfileName with the actual name of your wireless connection.

  • Press Enter.

  • Wait for the process to complete.
  • After it’s done, reconnect and reconfigure the network.

Make Sure That You Have The Latest Drivers Installed

Outdated drivers can sometimes be the cause of this error. If this is the case, you have to update your drivers in order to fix the error. You can update your drivers by visiting your network adapter manufacturer’s website. On the website locate your device. After locating the device download the latest drivers for it. If you don’t want to do that because you have no internet connection or just don’t feel like it, then you can install the drivers using a CD that you received with your wireless adapter. Though, you should know that these drivers might not be the latest ones.

However, updating drivers manually can be very annoying. So download a driver updater tool. It will complete the process automatically, and you won’t lose any files or damage your computer.

Check If Your Password Is Correct

Your Wi-Fi network should always be protected with a password. And when your Wi-Fi network is password-protected, you can sometimes accidentally enter the wrong password while trying to connect. You can fix this problem by disconnecting and reconnecting your network again. When you reconnect to make sure you type in the correct password. If you use different input languages on your PC, the keyboard can enter different characters. So double-check what you entered to make sure that doesn’t happen.

Use Command Prompt

Running certain commands from Command Prompt can also fix the wireless connection problems.

To use Command Prompt, follow these steps:

  • Press Windows key and X key together. That will open the Power User Menu.
  • In that menu select Command Prompt (Admin) to open the Command Prompt as an administrator.
  • When the Command Prompt stats opens, type in the following commands:

netsh winsock reset 

netsh int ip reset

ipconfig /release

ipconfig /renew

ipconfig /flushdns

Don’t forget to press Enter after typing each command.

  • Once you’ve executed all the commands, close the Command Prompt.

Remove Your Anti-Virus Software

Anti-virus software provides you online safety. However, some anti-virus programs interfere with the wireless connection. This interference can cause the Problem with wireless adapter or access point error. In this case, you have to remove all third-party anti-virus tools from your PC or temporarily disable all third-party anti-virus tools.

Mostly the McAfee anti-virus software is reported to be causing this error, but any other anti-virus tool can also cause this problem. So do perform this method once to make sure your anti-virus software is not responsible for any problem. If the error doesn’t solve after disabling the tools, you can re-enable them.

Check If Your Wireless Adaptor Is Enabled

If your wireless adapter is disabled, an error like this can originate. When you install some third-party application, the network adaptor can disable. So you have to check if your network adaptor is enabled.

To check if your wireless adaptor is enabled, follow these steps:

  • Press Windows key and X key together. That will open the Power User Menu.
  • In that menu select Device Manager from the list of options.

Select Device Manager By Right Clicking The Start Menu

  • The Device Manager will open. In that window, locate your wireless adaptor and double click on it.
  • That will open up the Properties of your wireless adaptor. In the Properties window, click on the Driver tab.
  • In the Driver section, look for the Enable button.

If you don’t see the Enable button in that section, you’ll know that your device is enabled and is working.

Driver Properties

Change The Name And Password Of Your Wi-Fi Connection

This fix is very simple. All you need to do is simply change the name and password of your wireless network. You can easily do that. However, if you don’t know how to do it, then you can consult with your router’s instruction manual. You’ll definitely find detailed instructions there.

Reset Your Router

The Problem with wireless adaptor or access point can also be caused by improper router configuration. This can be done by resetting the router. Resetting the router is not a very complex procedure. You can simply do that by pressing the reset button on your router. Another way of resetting your router is through router settings. You can open the router settings and click on the reset option in there.

Remember to save and export your configuration before resetting your router. That way you won’t have to enter the configuration manually. You can find further details on this process in your routers’ manual.